Anamorphic Prisms

Anamorphic Prisms

The Anamorphic prisms are used in pairs to magnify input beam size along one axis while leaving the other axis unchanged. The elliptical laser diode beams can be transfered into nearly circular beams.

Anamorphic Prism
With a anamorphic prism, the beam size can be changed along the axis while leaving the beam unchanged along the other axis, so the beam can be expanded, reduced or reshaped.
Anamorphic prisms are used to correct the asymmetric, elliptical beams produced by laser diodes, so that the beams are nearly circular in shape.
Specifications:

Attribute

Specification

Material:N-SF11,H-ZF13 Grade A optical glass
DimensionUpon Standard Size
Dimension Tolerance:+0.0, -0.2 mm
Clear Aperture>80%
Surface Quality:60/40
Flatness:l/8 @633 nm
Tetha:q = 29°27’±30″
CoatingMgF2 single layer on perpendicular surface


Anamorphic Prism

Anamorphic Prism

Part No.

A(mm)

B(mm)

C(mm)

AAP0101

12.0

12.0

8.5

Mount of anamorphic prism is available upon requirement.
Note: The prism is counted quantity at every piece. It shall be used as pair (two pieces).
Holders for Anamorphic Prisms
Specifications:
Material: Black anodized aluminum
Dimension Tolerance: +/ -0.1 mm

Part No.

A(mm)

B(mm)

C(mm)

AAP12

27.0

27.0

9.5

Note: Dimension and specification are available upon requests.

Anamorphic Prisms


Materical:Bk7 or ZnSe

Demension Tolrance:+0.0,-0.1mm
Deviation:+/-2 arc”

Anamorphic Prisms

The Anamorphic prisms are used in pairs to magnify input beam size along one axis while leaving the other axis unchanged. The elliptical laser diode beams can be transfered into nearly circular beams.

By adjusting the orientation of prisms(α1 and α2), the magnification range from 2x to 6x.

General Specifications

Material:N-SF11
Dimensional tolerance:±0.1mm
Surface quality:60-40 S/D
Surface flatness:λ/8 at 632.8nm
Bevel:Protective bevel
Typical angle:θ=29°27′
Angular tolerance:30″

[top]

Leave a Reply